Residential plumbing in Gilroy
Plumber in Gilroy, CA
Plumbing repair, drains, sewer laterals, water heaters and repiping for homeowners in Gilroy, from our shop in San Jose. This page also covers what's local: City-run water and sewer, a lateral that's yours from the curb to the house, hard water from nine City wells, permits through GO Permit and Silicon Valley Clean Energy's heat pump water heater programs.
- Google 4.9130+ reviews
- Licensed C-36 · C-20 · ACSLB License #1101278
- 1-year labor warranty24/7 service since 1986

Plumbing and HVAC Services for Gilroy Homes
- Plumbing repairLeaks, valves, fixtures, pressure
- 24/7 emergency plumbingBurst pipes, backups, no water
- Drain cleaningKitchen, bath and main line clogs
- Sewer line repair in GilroyCamera inspection, repair, replacement
- Trenchless sewer repairLining and pipe bursting
- Water heatersTank, tankless and heat pump
- Leak detectionHidden, wall and slab leaks
- RepipingGalvanized and polybutylene replaced
- Water line replacementMeter to house
- Gas line servicesNew lines, leaks, shutoff valves
- ToiletsRepair, replacement and clogs
- Faucets and fixturesFaucets, sinks and garbage disposals
- ShowersValves, leaks and installation
- Air conditioningRepair, installation and tune-ups
- Furnace serviceRepair, installation and tune-ups
- Heat pumpsInstallation and repair
- Ductless mini-splitsRooms and additions without ducts
- Heating and coolingAll our HVAC services
Plumbing in Gilroy: What's Different
Gilroy pumps its own well water and runs its own sewer, so most of the rules a homeowner meets here are the City's.
One City department, one after-hours line
The Utilities Department answers (408) 846-0219. After hours, the City lists 408-846-0350 for both water emergencies (extreme leaks between 3:30 p.m. and 7 a.m.) and sewer emergencies.
Curb to house is yours
The City's guidance puts the water and sewer lines from the curb to the house on the property owner, so roots, cracks and leaks in that stretch are a job for your plumber.
Hard water from nine wells
All City water is groundwater from nine wells in the Llagas Subbasin. The 2025 water quality report shows hardness averaging 237 ppm, with a range of 174 to 271 ppm.
Permits through GO Permit
The Building Division lists water heater and furnace replacements, sewer services and water services among the jobs that need a permit. Applications and inspections run through the City's GO Permit portal.
Most homes built 1970 to 2009
The City's Housing Element counts 20.6% of homes built in the 1970s, the largest single decade, and 56.2% built before 1990. About 70% of homes are detached single-family houses.
SVCE heat pump programs
Gilroy is a Silicon Valley Clean Energy community. SVCE runs Home Rebates and an Emergency Water Heater Replacement program for switching from gas to a heat pump water heater.
A Homeowner’s Guide to Plumbing in Gilroy
Water and sewer come from the City
The City of Gilroy supplies both water and sewer service through its Utilities Department, set up in 2024 out of Public Works. The water side runs the City’s wells, booster pumps, reservoirs and distribution pipes. The sewer side maintains about 167 miles of gravity sewer with more than 14,200 lateral connections, and the wastewater is treated at the plant of the South County Regional Wastewater Authority, which Gilroy shares with Morgan Hill.
Numbers to keep handy:
- Utilities Department: (408) 846-0219.
- After hours: 408-846-0350, which the City lists for sewer emergencies and for extreme water leaks between 3:30 p.m. and 7 a.m.
- Billing and starting service: Utility Billing at 408-846-0420.
Homes where the public sewer isn’t available rely on septic systems, which County of Santa Clara Environmental Health permits, repairs included. Inside the city, a building on a street with a public sewer, or within 200 feet of one, has to connect to it.
Your lines start at the curb
The City’s tree-root FAQ sums up the split: property owners are responsible for the water and sewer lines from the curb to the house. The City adds that roots won’t crack a sound pipe but will find their way into cracks and failed joints, and its Urban Forestry staff won’t remove a street tree just because its roots are in a line.
Three local rules shape sewer work:
- Cleanout: Gilroy’s amendment to the Plumbing Code (Section 719.1.1) calls for a cleanout on private property near the property line, brought up to grade in a listed box.
- Street work: digging in the sidewalk, planting strip or street needs an encroachment permit from Engineering, applied for at least 10 working days before work starts.
- Rainwater: City Code bars roof runoff, surface water and subsurface drainage from the sewer, so downspouts and yard drains can’t be tied into the lateral.
A camera inspection shows where roots or breaks are before anyone digs. See sewer line repair and trenchless sewer repair.
Hard well water
Gilroy’s drinking water is pumped from nine City wells in the Llagas Subbasin. Valley Water manages and recharges that basin but doesn’t deliver treated water to Gilroy. The 2025 Annual Water Quality Report gives hardness as 237 ppm on average, ranging from 174 to 271 ppm (about 14 grains per gallon on average), which is hard enough to scale water heaters, tankless heat exchangers, faucet aerators and valves.
The same report says the City has replaced 267 of the 398 service connections it identified with lead connectors, and as of April 2026 planned to replace the rest within two years.
Homes from every decade since the 1970s
The City’s 2023–2031 Housing Element counts 20.6% of homes built in the 1970s, the largest single decade, followed by 17.7% in the 1990s, 17.4% in the 2000s and 15.7% in the 1980s. Overall, 56.2% were built before 1990 and 19.9% before 1970; about 5% date from 1939 or earlier. Detached single-family houses make up about 70% of the stock. Growth peaked in the 1970s and 1980s, and the city keeps expanding west in the Hecker Pass and Glen Loma areas.
Homes from the 1970s and earlier may still have galvanized steel supply pipe, which narrows with corrosion and loses pressure, and original laterals of that age often let roots in. See repiping and leak detection.
Permits through GO Permit
The Building Division (408-846-0451, counter open Monday to Thursday, 8:30 a.m. to 4:30 p.m.) requires permits for water heater and furnace replacements or additions, sewer services, water services and extensions to plumbing systems. Applications, plan review and inspections go through GO Permit. Inspections need about 72 hours’ notice, a same-day cancellation or missed inspection can bring a reinspection fee, and the final inspection checks the required hot water pipe insulation. See water heater services.
Heat pump water heaters and SVCE
Gilroy is a Silicon Valley Clean Energy (SVCE) community; PG&E still handles gas service. The City’s Electrification page notes that the Bay Area air district phases out sales of new gas water heaters starting in 2027 and new gas furnaces in 2029, while existing equipment and repairs stay allowed. Its Pre-Wire guidance suggests adding an outlet within 3 feet of the water heater on a dedicated 240-volt, 30-amp or 120-volt, 20-amp circuit (240 volts for homes with four or more people or three or more bedrooms), so a failed tank can be swapped for a heat pump quickly.
SVCE offers:
- Home Rebates: for heat pump water heaters and heat pump HVAC replacing existing equipment in single-family homes, mobile homes, ADUs and buildings of up to four units. Reserve before installing; reservations last up to 120 days, and permit documents are part of the claim.
- Emergency Water Heater Replacement: replaces a failing gas water heater with a heat pump through SVCE partner contractors, who handle permits and rebates.
For water use, the City allows outdoor watering three days a week by address, never between 9 a.m. and 5 p.m., and points residents to Valley Water’s landscape and graywater rebates, which need a pre-inspection and approval before work begins. See heat pump water heaters.
Sources
City of Gilroy: Water · Water & Sewer · Utilities Department · Wastewater Collection · Wastewater Treatment · Tree roots in sewer and water lines (FAQ) · Building Division · Building Inspections · GO Permit · Encroachment and Transportation Permits · Ordinance 2025-06, building code adoption · Electrification · Pre-Wire: Prepare for the Future · Water Conservation · 2025 Annual Water Quality Report · 2023–2031 Housing Element. Gilroy City Code: Ch. 19, Sewers and Sewage Disposal. Silicon Valley Clean Energy: Service area · Home Rebates · Emergency Water Heater Replacement. Valley Water: Landscape rebates. County of Santa Clara: Onsite Wastewater Treatment Systems. Checked October 2026.
What Plumbing Costs in Gilroy
Most repairs are quoted as a fixed price before we start, so you approve the cost before any work begins. These are typical prices for common jobs in our service area.
| Service | Typical price (USD) |
|---|---|
| Drain cleaning (snaking) | $250–$600 |
| Sewer camera inspection | $300–$600 |
| Leak detection, typical accessible leak | $150–$600 |
| Tank water heater | $1,200–$2,000+ |
| Heat pump water heater | $2,500–$6,000+ |
| Sewer lateral replacement (typical) | $6,000–$15,000 |
| Whole-house repipe (PEX, typical home) | $8,000–$18,000 |
| Inspection feeWaived for service plan members | $59 |
Prices are installed, before any current special, and depend on access, materials and what we find.
In Gilroy the owner's part of the sewer lateral runs to the curb, so a repair near the street can add an Engineering encroachment permit and trench restoration to City standards on top of the plumbing permit. Repairs are quoted as a fixed price before we start.
Get a free estimate →Dustin did a great job fixing my main valve pipe in the front of my house…didn’t leave until it was completed (took around 3+hours).
Saved my life!…Good guy! 🙂
Sean C.Google review
Daniel was outstanding in getting the block in the pipeline in a short time. This was given up by another plumber… thanks Daniel
Krish S.Yelp review
Prompt response, polite, knowledgeable. Good at explaining options and following through until solved.
Pauline M.Google review
Current Specials
Save on your visit. Mention the offer when you book.
- Any Plumbing Service$50 OFFGet Offer: Any Plumbing ServiceLimit 1 per household. Cannot be combined with other offers. Expires January 15, 2028. See details for Any Plumbing Service
- Sewer Line InspectionFREECamera inspectionGet Offer: Sewer Line InspectionLimit 1 per household. Cannot be combined with other offers. Expires January 15, 2028. See details for Sewer Line Inspection
- Water Heater Installation$250 OFFGet Offer: Water Heater InstallationLimit 1 per household. Cannot be combined with other offers. Expires January 15, 2028. See details for Water Heater Installation
- Second OpinionFREEAlready have a quote from another licensed plumber?Get Offer: Second OpinionFor customers with a quote from another licensed plumber. Expires January 15, 2028. See details for Second Opinion
- 12-Month Financing0%Interest for 12 monthsGet Offer: 12-Month FinancingThrough Synchrony, subject to financing approval. Expires January 15, 2028. See details for 12-Month Financing
- Seniors, Teachers & Healthcare Workers5% OFFSeniors 65+, teachers and healthcare workersGet Offer: Seniors, Teachers & Healthcare WorkersFor seniors 65+, teachers and healthcare workers. Expires January 15, 2028. See details for Seniors, Teachers & Healthcare Workers
Plumber in Gilroy FAQs
Who do I call for a sewer backup in Gilroy?
If the backup is in your own line between the house and the curb, call a plumber: we answer 24/7 at (408) 978-3093, and same-day service is available. If sewage is spilling from a manhole or neighbors are backing up too, the City's main may be blocked: call the Utilities Department at (408) 846-0219, or 408-846-0350 after hours. See drain cleaning.
Which part of the water and sewer lines do I own in Gilroy?
The City's guidance is that property owners are responsible for the water and sewer lines from the curb to the house. Gilroy's local amendment to the Plumbing Code calls for a sewer cleanout on private property next to the property line, and work that reaches the sidewalk or street needs an encroachment permit from Engineering. See sewer line service in Gilroy and water line replacement.
Is Gilroy's water hard?
Yes. Gilroy's water is groundwater pumped from nine City wells, and the 2025 Annual Water Quality Report gives hardness as 237 ppm on average, ranging from 174 to 271 ppm, or roughly 14 grains per gallon. Water that hard leaves scale in tank and tankless water heaters, so regular flushing helps. See water heater services.
Do I need a permit to replace a water heater in Gilroy?
Yes. The Building Division requires a permit for water heater replacements and additions. The application and the inspection request go through the City's GO Permit portal, inspections are booked about 72 hours ahead, and the inspector checks the required hot water pipe insulation at final. We pull the permit as part of the job.
Do I have to replace my gas water heater with a heat pump in Gilroy?
No. The City's Electrification page says the Bay Area air district rules phase out sales of new gas water heaters starting in 2027 and new gas furnaces in 2029, but they cover new equipment only and don't ban existing appliances or repairs. If you want to switch, Silicon Valley Clean Energy's Home Rebates need a reservation before installation. See heat pump water heaters.
Does Gilroy have lead service lines?
The City runs a lead service line replacement program. Its 2025 water quality report says 267 of 398 service connections identified with lead connectors had been replaced, and as of April 2026 the City planned to finish the rest within two years. None of the 30 homes in the City's May 2024 tap sampling exceeded the lead action level. Pipes on your side of the curb are yours; see repiping.
How much does a plumber cost in Gilroy?
Most repairs are quoted as a fixed price before we start, so you know the cost up front. Typical prices: drain cleaning $250–$600, a sewer camera inspection $300–$600, a tank water heater $1,200–$2,000+ installed, and a whole-house PEX repipe $8,000–$18,000. The inspection fee is $59, waived for service plan members.
Need a plumber in Gilroy? We're here 24/7.
- CSLB License #1101278 (opens CSLB in a new tab): C-36 Plumbing · C-20 HVAC · A General Engineering
- 1-year labor warranty on our work
- BBB A+ Accredited Business (opens BBB in a new tab)
- Technicians trained and certified: NASSCO PACP, MACP and LACP · Rheem heat pump · Noritz Level 3 tankless · OSHA safety
- Member of IAPMO, NASSCO, BOMA, IFMA · Se habla español