House Repiping Cost Calculator: Estimate Your Repipe Price
Use this house repiping cost calculator to estimate the cost to repipe your San Jose or South Bay home with PEX or copper. Answer a few questions about your house for an instant typical price range.
Want to understand what drives the price before you calculate? Read our repiping cost guide.
Estimated repipe cost
$10,100–$13,800
Typical range, quoted as a fixed price after an on-site visit
- Home size
- Repipe, labor and materials
- Bathroom connections
- Permit and inspection
- Add-ons
Breakdown shows midpoint amounts before the ±15% range. For comparison, a typical San Jose home (1,500–2,000 sq ft, two bathrooms) repiped with PEX costs $8,000–$18,000.
Typical Repiping Costs in San Jose
These are the calculator's results for common South Bay homes on a raised foundation (crawl space or basement), one story unless noted, with no add-ons. Each is a typical range, quoted as a fixed price after an on-site visit, and includes the permit and inspection.
| Home | PEX | Copper |
|---|---|---|
| Under 1,000 sq ft, 1 bathroom | $6,100–$8,400 | $7,600–$10,400 |
| About 1,500 sq ft, 2 bathrooms | $10,100–$13,800 | $12,600–$17,200 |
| About 2,000 sq ft, 2 bathrooms | $13,200–$18,000 | $16,500–$22,500 |
| About 2,600 sq ft, 3+ bathrooms | $17,200–$23,500 | $21,500–$29,300 |
| About 1,500 sq ft, 2 bathrooms, two stories on a slab | $13,200–$18,000 | $15,700–$21,400 |
Prices checked October 2026.
Adding a water heater replacement adds about $1,200–$2,000+ for a tank heater. Learn more about whole-house repiping in San Joseor read our guide to how much it costs to repipe a house in San Jose.
What Is a Repiping Cost Calculator?
A repiping cost calculator is an online tool that estimates the cost to replace your home's water supply pipes based on your home's characteristics and the local labor market. Enter your home size, bathroom count, pipe material, foundation type, number of stories and any optional work to get an instant whole-house repiping estimate without an on-site inspection. The result is a realistic starting point for budgeting, comparing PEX and copper, and seeing how each part of the project affects the price.
The tool combines labor, materials, per-bathroom connections, the permit and optional services, such as drywall patch and paint, water heater replacement and main water line replacement, into one figure. Labor costs are set for San Jose and the South Bay, where plumbing labor costs well above the national average.
How Does This Calculator Determine Your Repipe Cost?
This repiping cost calculator estimates your project cost by combining five main cost components: labor, materials, per-bathroom connections, the permit and any optional services you select. Home size drives most of the labor and material cost, while your choice of pipe material, foundation type and number of stories refine the estimate to reflect how complex your project is.
The calculation follows this formula:
Estimated repipe cost = (home size × local labor cost per square foot × labor adjustments) + (home size × material cost per square foot) + (bathrooms × per-bathroom cost) + permit + optional add-ons
Labor adjustments account for factors that add time and difficulty to the job, such as slab foundations and multi-story layouts, which increase the labor cost applied to your home's size.
After calculating the total, the calculator shows a price range of about ±15% instead of a single figure. Plumbing layouts, pipe access, the condition of the existing pipe and the patching needed vary from one home to the next, even among homes of similar size.
What Will You Need to Use This Calculator?
You'll need your home size, bathroom count, pipe material preference, foundation type and number of stories, plus any optional add-ons you want included. Most homeowners already know these details, and if you don't know your home's square footage, the calculator can estimate it from the number of bathrooms.
ZIP Code
Enter your 5-digit ZIP code to check that your home is in the area these prices are for. Every South Bay ZIP code we serve uses the same San Jose-area labor costs, so the ZIP code doesn't change the estimate. You can still get an estimate without it.
Home Size (Square Feet)
Enter your home's total square footage to calculate labor and material costs. Larger homes need more pipe, so size is one of the biggest factors in your repiping cost. If you leave the size on “estimate,” the calculator estimates it from the number of bathrooms you select.
Number of Bathrooms
Select whether your home has 1, 2, or 3 or more bathrooms. Each bathroom adds to the estimate because it has more plumbing connections, fixtures and supply lines to repipe. This selection is also used to estimate your home's square footage when you don't enter it.
Pipe Material (PEX or Copper)
Choose whether you want your home repiped with PEX or copper. PEX has a lower material cost, while copper raises the overall project cost because the material costs more.
Foundation Type (Slab or Crawl Space/Basement)
Select whether your home is built on a slab or has a crawl space or basement. Slab homes often need more labor because reaching and routing the new lines takes longer; they are often rerouted through the attic and walls.
Number of Stories
Choose whether your home has 1, 2, or 3 or more stories. Multi-story homes usually need more labor because the lines must run vertically between floors, which makes the installation more complex.
Add-ons (Drywall, Water Heater, Main Water Line)
Select any additional work you expect to include with your repipe:
- Drywall patch and paint
- Water heater replacement
- Main water line replacement
These costs are added to your estimate only when you select them. The permit and inspection are already part of the repipe price.
What Factors Determine Your Repipe Cost?
Your repipe cost depends mainly on local labor costs, pipe material, home size, the number of bathrooms, the permit, foundation type, the number of stories and any optional services. The calculator combines these to estimate a realistic price range for your home.
Local Labor Costs
Labor is usually the largest part of a whole-house repipe. The calculator uses San Jose-area labor costs, so the estimate reflects the local market rather than a national average.
Pipe Material
Your choice of pipe directly affects the total. PEX has a lower material cost, while copper costs more per square foot and raises the estimate.
Home Size
Larger homes need more pipe, fittings and installation time. As square footage goes up, labor and material costs rise with it.
Per-Bathroom Cost
Each bathroom adds plumbing connections that take more installation work. The calculator adds a fixed cost per bathroom for these connections.
Permit and Inspection
A whole-house repipe needs a City plumbing permit and inspection before and during the work. CPI's repipe price includes the permit and the inspection, so the calculator includes them as well.
Foundation Type
Slab homes generally need more labor because reaching and routing new water lines is harder than in homes with a crawl space or basement. The calculator applies a labor adjustment for slab foundations.
Number of Stories
Repiping a multi-story home usually takes more labor to route the lines between floors. The calculator increases the labor part of the estimate for two-story and three-story homes.
Selected Add-ons
Optional services such as drywall patch and paint, water heater replacement and main water line replacement are added only when selected. Including them raises the estimate but gives you a more complete budget for the project.
How Does This Calculator Price by Location?
- Prices are set for the South Bay. CPI serves San Jose and nearby cities, including Campbell,Cupertino, Los Gatos, Milpitas,Santa Clara and Sunnyvale. The calculator uses labor costs for the San Jose–Sunnyvale–Santa Clara metro area. See our full service area.
- Higher-wage areas cost more. Labor costs vary widely across the United States. In San Jose and the rest of the San Francisco Bay Area, plumbing wages are higher than in most of the country, so labor makes up a larger share of a repipe here.
- Pricing is based on the metro area, not individual ZIP codes. There is no public database of repiping prices for every ZIP code, so neighboring ZIP codes in the same metro area get the same labor costs.
What Are the Limitations of This Repiping Cost Calculator?
This calculator gives a reliable estimate, but it can't account for every condition that affects the final cost. Use the estimate as a budgeting tool, and confirm the final price with an in-home inspection.
- Results depend on your inputs. The estimate is only as accurate as the information you enter. Incorrect or missing details affect the result.
- It doesn't capture every project detail. The calculator doesn't account for exact pipe routing, fixture count, hidden plumbing conditions or unexpected repairs.
- Local pricing uses metro-area costs. Labor costs are based on the San Jose metro area, not individual ZIP codes, because no public ZIP-level pricing database exists.
- Estimates are not final quotes. The calculator gives a typical price range, not a fixed quote. A licensed plumbing contractor must inspect your home to set the final price.
What Should You Do With Your Repipe Estimate?
Once you know your estimated repipe cost, compare your options, plan your budget and schedule a professional inspection for an accurate quote. The estimate shows the expected price range, but the final cost depends on your home's plumbing and the project's requirements.
Compare PEX and Copper Costs
Switch between PEX and copper to see how the pipe material changes the overall cost.
Review Optional Services
Add or remove water heater replacement or main water line replacement to estimate the total cost of your complete project.
Schedule an In-Home Inspection
Use your estimate as a starting point, then schedule an inspection with a licensed plumbing contractor for a detailed, project-specific quote. If you're in CPI Service's South Bay service area, contact us for a free in-home repipe estimate.
Repiping Cost Calculator FAQs
How accurate is this repiping cost calculator?
It's a solid ballpark, good enough to budget and to compare PEX with copper, but it isn't a firm quote. The only way to get an exact price is an in-home assessment, because access, the condition of the existing pipe, wall types and the fixture layout all matter.
How much does it cost to repipe a typical San Jose home?
A whole-house PEX repipe of a typical San Jose home (about 1,500 to 2,000 square feet with two bathrooms) usually costs $8,000 to $18,000, including the permit and inspection. See our repiping cost guide for what drives the price.
Does the estimate include the permit and drywall patching?
The permit and inspection are always included: whole-house repiping needs a City plumbing permit and inspection. Drywall patch and paint for the wall openings is an add-on. Tick it in the calculator to include it in your estimate.
Is PEX or copper cheaper for a repipe?
PEX. It has a lower material cost and installs with fewer wall openings, which is why most repipes use it. Copper costs more. Switch the pipe material in the calculator to compare the two for your home.
Is the calculator result a final quote?
No. It's a typical price range. A licensed plumber has to see your home to set the final price. In San Jose and the South Bay, CPI gives free in-home repipe estimates and quotes the job as a fixed price: request a free estimate or call (408) 978-3093.
Free in-home quote
Repiping in San Jose & the South Bay?
The calculator gives you a ballpark. For an exact, fixed price, we look at your home in person: access, the condition of the existing pipe, wall types and the fixture layout all matter. Our repipe price includes the permit and inspection.
See our San Jose repiping service
Call (408) 978-3093