(408) 978-3093

Residential plumbing in Milpitas

Plumber in Milpitas, CA

Plumbing repair, drains, sewer laterals, water heaters and repiping for homeowners in Milpitas, from our shop in neighboring San Jose. This page also covers what's local: City-run water and sewer, the lateral split at the property line, two water supplies, high water pressure in parts of town, online permits and Go Electric, Milpitas! rebates.

  • Google 4.9130+ reviews
  • Licensed C-36 · C-20 · ACSLB License #1101278
  • 1-year labor warranty24/7 service since 1986
The CPI Service team standing in front of company vans

Get a Free Estimate

Takes about 30 seconds. No obligation.

What do you need help with?

Google 4.9 · 130+ reviews · CSLB #1101278 · BBB A+

Or call (408) 978-3093, 24/7, or book a time online (opens Housecall Pro in a new tab).

Plumbing in Milpitas: What's Different

The City of Milpitas runs its own water and sewer utilities, so the rules for your home's plumbing come from City Hall rather than a water company or sanitary district.

  • One City number for water and sewer

    Milpitas Public Works takes water and sewer emergencies at 408-586-2600 on weekdays, 7 a.m. to 5 p.m. After hours and on holidays, call Police Dispatch at 408-586-2400.

  • The side sewer splits at the property line

    The House Sewer, from your house to the property line, including the property-line cleanout, is yours. The City repairs structural failures in the House Lateral, from the property line to the main, at no charge.

  • Two water supplies, kept separate

    Depending on the neighborhood, homes get SFPUC (mostly Hetch Hetchy) or Valley Water. The 2025 report shows hardness averaging 60 ppm for SFPUC and 100.5 ppm for Valley Water.

  • Pressure can reach 140 psi

    The City says pressure ranges from 40 to 140 psi by location. Above 80 psi the plumbing code calls for a pressure regulator, and then an expansion tank at the water heater.

  • Online permits for water heater swaps

    Single-family and duplex owners can pull a like-for-like water heater permit (ONL WATERHEATER) or a gas-to-heat-pump permit (ONL HP WH) online through eTRAKiT.

  • Seismic gas shutoff with gas work

    When an existing gas line is altered or added to, Milpitas requires a seismic (motion) or excess-flow gas shutoff device after the PG&E meter and ahead of the appliances.

A Homeowner’s Guide to Plumbing in Milpitas

Water and sewer come from the City

The City of Milpitas provides drinking water and sewer service to its homes; PG&E supplies gas, and Silicon Valley Clean Energy is the electricity provider. Put these numbers where you can find them:

  • Water and sewer emergencies: Public Works at 408-586-2600 (weekdays, 7 a.m. to 5 p.m.), or Police Dispatch at 408-586-2400 after hours and on holidays.
  • Gas leak: leave the house, call 911, then PG&E at 1-800-743-5000.

Service lines run from the main in the street, through the City meter, to the house. Replacing the pipe between the meter and the house is private work under a City plumbing permit (the residential Water Service Line handout); see water line replacement. The City’s lead service line inventory, filed in October 2024, found no lead or galvanized service lines, public or private, that need replacing.

Sewer laterals: split at the property line

Milpitas calls the pipe from your house to the main the side sewer and divides it in two:

  • House Sewer (private): from the house to the property line, including the property-line cleanout. Maintenance and repairs are the owner’s.
  • House Lateral (public): from the property line to the main. When a broken pipe or other structural failure causes a stoppage here, the City repairs it at no charge.

Clearing stoppages is still the user’s job along the whole lateral. If routine cleaning fails, the City will try through the street cleanout and, where one exists, inspect the lateral by camera. If it finds grease, rags or other material from your house, or no stoppage at all, you pay its costs. Cleanouts belong to the owner, and the City won’t install one.

Repairing the side sewer takes a permit. The residential sewer line permit covers the pipe from 2 feet outside the house to the back of the City sidewalk. Work under the sidewalk or street needs a separate encroachment permit, issued in person at the Permit Center and only to licensed, insured contractors. At the underground inspection the new pipe is filled with water and a camera must be on site. Trenchless lining is allowed under the plumbing code, but not for collapsed pipe. See trenchless sewer repair.

Homes: mostly 1970s and newer

Milpitas grew late. The City’s 2015 Housing Element, using 2011 Census data, put the median home’s year built at 1977: 73 percent of homes dated from 1970 or later, the 1970s alone added about a third, and about 27 percent were older. By 2022 the City counted 25,183 homes, about 70 percent of them single-family.

Homes from the 1950s and 1960s may still have galvanized steel water pipe, which narrows with rust and loses pressure, and cast iron or clay sewer pipe that roots can enter. See repiping and leak detection.

Water pressure and hardness

According to the City, pressure ranges from 40 to 140 psi depending on location. The City’s handouts follow the plumbing code: above 80 psi a pressure regulator with a strainer is required, and where a regulator, check valve or backflow preventer is installed, the water heater needs an expansion tank.

Milpitas buys treated water from SFPUC (mostly Hetch Hetchy) and Valley Water and keeps the two separate. SFPUC serves the area east of I-680 south of Calaveras Blvd. and east of I-880 north of it; Valley Water serves the rest. The 2025 water quality report shows SFPUC hardness averaging 60 ppm (8.1–112) and Valley Water 100.5 ppm (77–146). Compare other cities in our South Bay water hardness table.

Permits for plumbing work

The Office of Building Safety (408-586-3240) issues plumbing permits; single-family and duplex owners can apply online in eTRAKiT.

  • Water heaters: a like-for-like replacement can be permitted online as ONL WATERHEATER; a gas-to-heat-pump swap in the same spot, on a new circuit without a panel upgrade, as ONL HP WH. Other scopes are emailed to the Building Permit Center, with the City’s panel size check when a heat pump needs power.
  • Repiping: replacing water pipe inside the house needs a plumbing permit, with rough and final inspections.
  • Gas lines: replacing, repairing or extending gas piping needs a permit. Altering or adding to the gas system also requires a seismic or excess-flow gas shutoff device after the PG&E service tee. See gas line services.
  • Every final: any noncompliant plumbing fixtures must be replaced with water-conserving ones before a permit is approved.

Water heaters also need seismic strapping, and a drain pan where a leak would cause damage.

Rebates and water programs

Silicon Valley Clean Energy offers Home Rebates for heat pump water heaters replacing gas or electric resistance units; apply and be approved before installing, and the claim needs permit approval. Its Emergency Water Heater Replacement program uses SVCE partner contractors. The City’s Go Electric, Milpitas! program adds rebates on top of SVCE’s for heat pump water heaters, heat pump HVAC, panel upgrades and induction cooking. See heat pump water heaters.

For water, the City’s WaterSmart portal sends leak alerts, and Valley Water offers residential landscape rebates (including laundry-to-landscape graywater, with pre-approval), free conservation supplies and free Water Wise outdoor surveys.

Sources

City of Milpitas: Sewer · Sewer FAQs · Water and sewer information · 2025 water quality report · Building permits and resources · Water heater installation · Residential handouts: Water heater, Sewer line, Water piping, Water service line, Gas line · Electrification Corner · Rebates and free programs · Housing Element 2015–2023 · Housing Element 2023–2031. Silicon Valley Clean Energy: Home Rebates · Emergency Water Heater Replacement. PG&E: What do I do if I smell gas?. Checked October 2026.

What Plumbing Costs in Milpitas

Most repairs are quoted as a fixed price before we start, so you approve the cost before any work begins. These are typical prices for common jobs in our service area.

Typical prices in Milpitas, installed, in US dollars. Checked October 2026.
ServiceTypical price (USD)
Drain cleaning (snaking)$250–$600
Sewer camera inspection$300–$600
Leak detection, typical accessible leak$150–$600
Tank water heater$1,200–$2,000+
Heat pump water heater$2,500–$6,000+
Sewer lateral replacement (typical)$6,000–$15,000
Whole-house repipe (PEX, typical home)$8,000–$18,000
Inspection feeWaived for service plan members$59

Prices are installed, before any current special, and depend on access, materials and what we find.

In Milpitas, a home on the high end of the City's 40 to 140 psi pressure range needs a pressure regulator, and with it an expansion tank at the water heater. On the sewer side, the City won't install a property-line cleanout; if your home has none, adding one is your cost.

Get a free estimate →
  • Luis came to my house to look at a toilet that had been frequently backing up. He was very thorough in his diagnosis, taking out the toilet and using the outdoor cleanouts to capture videos of the pipes. He found and removed the blockage, and the toilet has been flushing great since. Thanks CPI for a job well done

    Brian W.Google review

  • Great service and great attitude. Dustin and Jay were up front with the time and cost. They explained the process and walked us through all the work they did. True pros, will definitely do business with them again. Thank you for fixing the leak!

    Tran C.Google review

  • CPI Service is a great company to use for HVAC too! Our A/C stopped working during the recent heatwave & another company wanted to replace our whole unit. Then we called CPI & they found it didn’t need to be replaced, they fixed it that day! I really appreciate a company that responds quickly, is very professional & reasonably priced!!! I’ll be using them for sure in the future.

    Jaycee V.Google review

Current Specials

Save on your visit. Mention the offer when you book.

Plumber in Milpitas FAQs

Who do I call for a sewer backup in Milpitas?

For a sewer spill or overflow, call Milpitas Public Works at 408-586-2600 on weekdays from 7 a.m. to 5 p.m., or Police Dispatch at 408-586-2400 after hours and on holidays. A backup inside the house is usually a stoppage in your own side sewer, which the City leaves to the homeowner; we answer 24/7 at (408) 978-3093. See drain cleaning.

Who owns the sewer lateral in Milpitas?

Milpitas splits the side sewer at the property line. The House Sewer, from the house to the property line, including the property-line cleanout, is the owner's to maintain and repair. The House Lateral, from the property line to the main, is the public side: the City repairs a broken pipe or other structural failure there at no charge. Clearing ordinary stoppages along the whole lateral is still the user's job, and if the City finds grease, rags or no stoppage at all, the user pays its costs. See sewer line repair.

Is Milpitas water hard?

Moderately, and it depends on where you live. The City keeps its two supplies separate: SFPUC water serves the east side (east of I-680 south of Calaveras Blvd. and east of I-880 north of it), and Valley Water serves the rest. The 2025 water quality report shows SFPUC hardness of 8.1 to 112 ppm, averaging 60 ppm, and Valley Water hardness of 77 to 146 ppm, averaging 100.5 ppm.

Do I need a permit to replace a water heater in Milpitas?

Yes, any water heater installation or replacement needs a plumbing permit. At a single-family home or duplex, a same-type replacement in the same spot can be permitted online in eTRAKiT as ONL WATERHEATER, and replacing a gas unit with a heat pump water heater on a new circuit, without a panel upgrade, as ONL HP WH. Other jobs go to the Building Permit Center by email. See water heater services.

Does Milpitas require a heat pump water heater?

Not when you replace one. The City's residential water heater handout says a gas water heater may be replaced with a gas, propane or heat pump unit, following the California Energy Code. If you do switch, the Go Electric, Milpitas! program adds City rebates on top of Silicon Valley Clean Energy's, applied through SVCE's application, which must be approved before installation. See heat pump water heaters.

Does Milpitas have lead water service lines?

The City's lead service line inventory, filed with the state in October 2024, found no lead or galvanized service lines, public or private, that need replacing. Lead can still come from older plumbing inside the house; Public Works (408-586-2600) takes questions about testing. See repiping.

How much does a plumber cost in Milpitas?

Most repairs are quoted as a fixed price before we start, so you know the cost up front. Typical prices: drain cleaning $250–$600, a sewer camera inspection $300–$600, a tank water heater $1,200–$2,000+ installed, and a whole-house PEX repipe $8,000–$18,000. The inspection fee is $59, waived for service plan members.

Need a plumber in Milpitas? We're here 24/7.