Furnace Service in Cupertino
Furnace Installation and Repair in Cupertino, CA
Gas furnace repair and replacement, and furnace-to-heat-pump conversions, for Cupertino homeowners from our shop in San Jose. This page covers the local rules: the City's instant furnace permit and when it doesn't apply, the inspection checklist, duct testing, alarm requirements, the Air District's 2029 zero-NOx standard and SVCE's rebate for retiring a gas furnace.
- Google 4.9130+ reviews
- Licensed C-36 · C-20 · ACSLB License #1101278
- 1-year labor warranty24/7 service since 1986

Furnace Services for Cupertino Homes
Furnaces in Cupertino: What's Different
Cupertino lets licensed contractors pull some furnace permits online, but only for the simplest swap; anything more goes through the Building Division's standard process.
Instant permit, only without A/C
A licensed contractor can get an instant online permit for a furnace replaced in the same location at a single-family home or duplex, provided there's no air conditioning and the property isn't historic.
The City's furnace checklist
Cupertino's furnace policy asks for a disconnect in sight of the unit, a dedicated circuit, a service outlet and light, a sediment trap and a California Energy Commission compliance certificate.
Alarms checked before the final
Work valued over $1,000 brings smoke and CO alarms up to the Residential Code. The permit isn't finaled until the alarms are verified on site or a signed self-certification is returned.
Heat pumps need a sound worksheet
Switching to a heat pump takes a standard permit with spec sheets, a floor and site plan with property-line setbacks, and the City's Sound Rating Worksheet for the noise ordinance.
Zero-NOx furnaces from 2029
The Bay Area Air District's Rule 9-4 sets a zero-NOx standard for furnaces under 175,000 BTU/hr made after January 1, 2029. Working furnaces don't have to come out.
SVCE pays to retire a gas furnace
Silicon Valley Clean Energy, Cupertino's electricity provider, rebates a heat pump that replaces a gas furnace. The rebate must be reserved before installation, and dual-fuel systems don't qualify.
A Homeowner’s Guide to Furnace Installation and Repair in Cupertino
Instant or standard permit
The City’s Building Division says a mechanical permit is required to install or replace a furnace, before the work begins. Which kind depends on the home:
- Instant permit: issued online through Accela Citizen Access to licensed contractors with an active account, for a furnace replaced in the same location at a single-family home or duplex, with no A/C and no historic designation.
- Standard permit: everything else, including a furnace that shares ducts and a blower with central air, a relocated unit and any switch to a heat pump.
Before a final inspection can be scheduled, the contractor and every subcontractor must hold a City of Cupertino business license as well as a state contractor’s license. Permit questions go to the Permit Center at (408) 777-3228. Repairs that replace only a minor part, without altering the equipment’s approval, don’t need a permit.
What the inspector checks
Cupertino’s Residential Furnace Installation & Replacement Policy, revised February 2024, lists the requirements for a replacement:
- an electrical disconnect in sight of the furnace, and a dedicated circuit;
- a 120-volt service outlet within 25 feet on the same level, and a switched light controlled at the access entrance;
- combustion air, and clearance to combustibles per the manufacturer;
- a sediment trap on the gas line downstream of the shutoff, close to the furnace inlet;
- in a garage, burners at least 18 inches above the floor unless the unit is listed as flammable-vapor-ignition resistant, and protection from vehicles;
- anchoring and support for the unit, and a Certificate of Compliance from the California Energy Commission.
Attic furnaces have extra rules. Under conventional framing, the ceiling joists below the unit are doubled with at least 2x6 lumber; under engineered trusses, a wet-stamped engineering report must be approved before the permit is issued. See gas line services.
Duct testing under the Energy Code
California’s 2025 Energy Code applies to alterations of existing homes, not only to new ones. The Energy Commission’s HVAC guidance says altering a space-conditioning system triggers the duct sealing rules, and that replacing either the indoor or the outdoor unit of a split system is enough on its own. Unless the ducts are replaced, the installer and an ECC-Rater test them:
- 10% or less total leakage, or 7% or less leakage to outside;
- otherwise, all accessible leaks sealed and confirmed by an ECC-Rater with a smoke test and visual check.
Any required testing is listed on the Certificate of Compliance the City asks for. See duct repair.
Smoke and CO alarms
The City’s alarm self-certification form, revised January 2025, applies the Residential Code to permitted work on existing homes valued over $1,000. Smoke alarms go in each bedroom; smoke and CO alarms go on every level, including basements and habitable attics, and outside each sleeping area. CO alarms are required where the home has a fuel-burning appliance or an attached garage, which covers any home with a gas furnace.
Alarms must be State Fire Marshal listed. Battery-only alarms are allowed when the work doesn’t remove wall or ceiling finishes. The permit isn’t finaled until the alarms are verified: on site when the inspection area is inside the house, or by the signed form when no interior inspection is needed.
The Air District rule and Cupertino’s all-electric code
Bay Area Air District Rule 9-4 has two steps for furnaces:
- January 1, 2024: an ultra-low-NOx standard for residential fan-type central furnaces, which gas models are available to meet.
- January 1, 2029: a zero-NOx standard for furnaces under 175,000 BTU/hr manufactured after that date.
The District says the only appliances meeting zero-NOx today are electric, that working furnaces need not be removed before they fail, and that it will complete a cost and technology assessment for furnaces before 2029.
Cupertino’s own all-electric rule never reached existing homes. It required new buildings to be all-electric, and the City has not enforced it since May 2024. A replacement furnace can still be gas.
Switching to a heat pump
Gas comes from PG&E; electricity comes from Silicon Valley Clean Energy (SVCE). A heat pump replacing a furnace needs a standard permit. The City’s heat pump handout asks for spec sheets with clearances and decibel ratings, a floor and site plan showing every unit, the main panel and setbacks to property lines, and the Sound Rating Worksheet, which checks the unit against the noise ordinance in Chapter 10.48. The plans must also show the home will be heated to at least 68°F, measured 3 feet up.
SVCE’s Home Rebates cover a heat pump that replaces a gas furnace:
- reserve before installation; a reservation lasts up to 120 days;
- at least 16 SEER2 (or SEER 17) or an inverter heat pump; single-stage units and dual-fuel systems don’t qualify;
- ducted and ductless systems both qualify, and existing AC isn’t required;
- the old furnace removed, with photos, costs and permit documents submitted after the work.
Income-qualified households get a larger rebate. See heat pumps, mini-splits and SVCE heat pump rebates.
Sources
City of Cupertino: Instant Permits (Residential Only) · Building Division FAQ · Forms, Handouts and Fee Schedules · Residential Furnace Installation & Replacement Policy · Permitting Requirements for Heat Pumps · Smoke/CO Alarm Self-Certification · All-Electric Building · Utilities. Silicon Valley Clean Energy: Home Rebates · Appliance Specifications, April 2026. California Energy Commission: 2025 Single-Family HVAC. Bay Area Air District: Building Appliances Rule Implementation · Myths vs. Facts. Checked October 2026.
Furnace Prices in Cupertino
Most repairs are quoted as a fixed price before we start, so you approve the cost before any work begins. These are typical prices for common jobs in our service area.
| Service | Typical price (USD) |
|---|---|
| Flame sensor | $150–$350 |
| Furnace igniter | $200–$450 |
| Pressure switch | $250–$500 |
| Inducer motor, gas valve or control board | $500–$1,500 |
| Blower motor | $400–$900 |
| Dual-fuel system (heat pump + furnace) | $10,000–$20,000 |
| Inspection feeWaived for service plan members | $59 |
Prices are installed, before any current special, and depend on access, materials and what we find.
In Cupertino a furnace swap at a home with central air, or a move to a new location, needs a standard mechanical permit instead of the instant one. Attic installs can add joist doubling or, under engineered trusses, a stamped engineering report, and the new furnace triggers duct sealing and ECC-Rater testing.
Get a free estimate →Prompt response, polite, knowledgeable. Good at explaining options and following through until solved.
Pauline M.Google review
Our new heat pump system has just been installed and we are very pleased with CPI and the new equipment. We are especially grateful for the knowledgeable and hard-working technician Bunhak, who worked throughout our recent heatwave to finish the job. We would highly recommend CPI for any HVAC installation or maintenance.
Linda G.Google review
Great, reliable, and timely service at a reasonable price. I shopped around quite a bit before landing on CPI. Their rates were competitive, they responded promptly, and their plumber fixed a few issues quickly and without much fuss. I’ll definitely be calling them again the next time we have issues!
Allan H.Google review
Current Specials
Save on your visit. Mention the offer when you book.
- Any Plumbing Service$50 OFFGet Offer: Any Plumbing ServiceLimit 1 per household. Cannot be combined with other offers. Expires January 15, 2028. See details for Any Plumbing Service
- Sewer Line InspectionFREECamera inspectionGet Offer: Sewer Line InspectionLimit 1 per household. Cannot be combined with other offers. Expires January 15, 2028. See details for Sewer Line Inspection
- Water Heater Installation$250 OFFGet Offer: Water Heater InstallationLimit 1 per household. Cannot be combined with other offers. Expires January 15, 2028. See details for Water Heater Installation
- Second OpinionFREEAlready have a quote from another licensed plumber?Get Offer: Second OpinionFor customers with a quote from another licensed plumber. Expires January 15, 2028. See details for Second Opinion
- 12-Month Financing0%Interest for 12 monthsGet Offer: 12-Month FinancingThrough Synchrony, subject to financing approval. Expires January 15, 2028. See details for 12-Month Financing
- Seniors, Teachers & Healthcare Workers5% OFFSeniors 65+, teachers and healthcare workersGet Offer: Seniors, Teachers & Healthcare WorkersFor seniors 65+, teachers and healthcare workers. Expires January 15, 2028. See details for Seniors, Teachers & Healthcare Workers
Furnace Service in Cupertino FAQs
Do I need a permit to replace a furnace in Cupertino?
Yes. The Building Division requires a mechanical permit to install or replace a furnace, and says permit fees are doubled when work starts without one. A licensed contractor with an Accela Citizen Access account can get an instant permit for a replacement in the same location at a single-family home or duplex with no A/C and no historic designation. Any other furnace job takes a standard permit. See furnace repair and installation.
My furnace shares a system with central air. Can I still get an instant permit?
No. The City's instant furnace permit is limited to homes without air conditioning, so a furnace that shares its blower and ducts with an AC coil goes through the standard permit process. The same applies if the furnace moves to a new spot, or the home is historic or isn't a single-family house or duplex.
Can I replace my gas furnace with another gas furnace in Cupertino?
Yes. The City's all-electric requirement applied only to newly constructed buildings, and the City stopped enforcing that code chapter, Municipal Code Chapter 16.32, on May 15, 2024, after a federal appeals court ruling. The Air District's zero-NOx standard applies to furnaces manufactured after January 1, 2029.
Do I need carbon monoxide alarms for a furnace permit?
Usually, yes. Cupertino's alarm form says that when work on an existing home is valued over $1,000, the Residential Code requires smoke and CO alarms on every level and outside each sleeping area, with smoke alarms also in each bedroom. CO alarms are required only in homes with a fuel-burning appliance or an attached garage. Battery-only alarms are allowed when the work doesn't open walls or ceilings. The permit isn't finaled until the alarms are verified.
What permit do I need to switch from a furnace to a heat pump in Cupertino?
A standard permit, not the instant one. The City's heat pump handout asks for a permit application, product specifications with clearances and decibel ratings, a floor plan and site plan showing the indoor and outdoor units, the electrical panel and setbacks to property lines, and a completed Sound Rating Worksheet. With a complete package the permit can be issued over the counter, or in 2 to 3 business days by email. See heat pumps.
Does SVCE offer a rebate for replacing a gas furnace?
Yes, when the replacement is a heat pump. Silicon Valley Clean Energy requires approval before installation (it has a process for emergency replacements), a heat pump of at least 16 SEER2 or an inverter model, removal of the old furnace, no dual-fuel backup and proof of permitting. Existing air conditioning isn't required. See SVCE heat pump rebates.
How much does furnace repair and installation cost in Cupertino?
Most jobs are quoted as a fixed price before we start, so you know the cost up front. Typical prices: flame sensor $150–$350; furnace igniter $200–$450; pressure switch $250–$500; inducer motor, gas valve or control board $500–$1,500; blower motor $400–$900; dual-fuel system (heat pump + furnace) $10,000–$20,000. The inspection fee is $59, waived for service plan members.
Need furnace service in Cupertino? Call us.
- CSLB License #1101278 (opens CSLB in a new tab): C-36 Plumbing · C-20 HVAC · A General Engineering
- 1-year labor warranty on our work
- BBB A+ Accredited Business (opens BBB in a new tab)
- Technicians trained and certified: NASSCO PACP, MACP and LACP · Rheem heat pump · Noritz Level 3 tankless · OSHA safety
- Member of IAPMO, NASSCO, BOMA, IFMA · Se habla español